|
Who's Online
There currently are 6041 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Nice manual. Clear copy and very rare, to boot. Great price, too!
;
Excellent service manual. Complete service info. with schematics, step-by-step instructions and illustrations. Well worth the price!
;
Great product, helped me to restore vintage walkman cassette.
Just some pictures could be little bit more sharp and contrast
Thank you
;
I love older radio's and the service manuals that are sometimes hard to find. Was able to find a manual quite easily on this site.
;
Thank you for your shop manual! Your help was very useful - the device is repaired! Once again - Thank you! I wish you a successful business! Edward (Russia).
Service manual
CHASSIS 2112-Series EC7-A
The IF of AM sound is basically formed by IC1400, integrated circuit TDA9830T, and by the surface acoustic wave SF1400. Its input is the output of tuner intermediate frequency. Its output is the AM demodulated monaural audio signal. The operation is the following: the surface acoustic wave SF1400, it has an only one resonance at the carrier frequency of the AM modulated sound signal; therefore, it only allows the pass of this signal, which is regenerated and self-multiplied, giving as result the demodulated signal. This circuit does not require adjustments. 4.8.3 L� system. The L� transmission system, used in France, differs mainly from L system in the signal spectrum, which is in frequency inverted and it is only used in channels of band I. This is why in the tuning menu of TV sets with L� system, when the system is France, there is an additional band, VL�. It covers the same channels as band VL but in band VL reception is made in system L�. In order to carry out the signal reception with inverted spectrum, what must be done in this chassis is to change the intermediate frequency of the picture carrier of 38,9 MHz from the rest of systems to 33,9 MHz. Therefore, the surface acoustic wave of picture, SF200, is intended to work both frequencies of picture carrier in TV sets that have this system. As far as the sound, the intermediate frequency of its carrier changes from 32,4 MHz with system L to 40,4 MHz with system L'. Therefore, in TV sets with system L', the surface acoustic wave, SF1400, can be switched between both frequencies by the microprocessor, by means of the circuit associated to D1200 and D1201. The control signal is - LP/L 4.8.4 Audio switching. The audio switchings are carried out by means of: IC400, IC1401, IC1400 and by �RADIO (pin 10 de IC100), �AM; SCART (pin 11 de IC100) and �AM; FM (pin 13 de IC100) signals. IC400 allows selecting between a FM sound coming from the tuner signal and an external audio signal. The audio supplies are three, SCART audio (S900) in parallel with the frontal RCA (S902), AM audio for TV sets with SECAM L standard and audio of FM radio for models with radio. The audio output through the SCART can be sound from the tuner, radio sound or AM sound. The table and the diagram of switchings, that allow all these possible combinations, are the following ones:
-RADIO 1 1
-AM; SCART 1 0
-AM; FM 1 0
External Audio Speakers output SCART output selected Frontal SCART/RCA Tuner or AV (depends on Tuner the user) AM AM AM 18
|
|
|
> |
|